2

Ubiquiti UniFi airCube Home WiFi AP vs Ubiquiti UniFi EdgePoint S16 Karşılaştırma

En fazla 4 ürün. Ürün kartlarından veya ürün sayfasından «Karşılaştır» ile ekleyin.

Seçili (2/4) Ubiquiti EdgeMAX airCube Home WiFi AP × Ubiquiti EdgeMAX EdgePoint S16 ×
Tümünü temizle

Özellik karşılaştırması

Özellik Ubiquiti EdgeMAX airCube Home WiFi AP Ubiquiti EdgeMAX EdgePoint S16
Kategori Kablolu Kablolu
Model ACB-AC EP-S16
Fiyat Fiyat ve stok sorunuz Fiyat ve stok sorunuz
Stok Stokta Stokta
Boyutlar 87.8 x 89.5 x 89.25 mm (3.5 x 3.5 x 3.5") Without wall-mount: 326.6 x 382.7 x 88.8 mm (12.9 x 15.1 x 3.5")With wall-mount: 326.6 x 382.7 x 105.5 mm (12.9 x 15.1 x 4.2")
Ağırlık 280 g (9.9 oz) Without wall-mount: 3.4 kg (7.5 lb)With wall-mount: 3.8 kg (8.4 lb)
Networking interface (4) GbE RJ45 ports (1) RJ45 serial port(16) 10/100/1000 RJ45 ports(2) 1/10 Gbps SFP+ ports
Management interface EthernetWiFi —
Power method Micro-USB adapter (Included)24V DC, 0.83A PoE 24V In on Ethernet port 1 —
Power supply 24V Min. 54V / 0.8A (Excludes PoE output)
Supported voltage range 22—27V DC 42–56V DC (-48V is NOT supported)
Max. power consumption 8.5W 40W (Excludes PoE output)
PoE Out Controllable 24V PoE Out (4, 5+, 7, 8-) on WAN Port —
Operating frequency 2.4 GHz/5 GHz —
Antenna gain2.4 GHz5 GHz 4 dBi5 dBi —
Max. speeds2.4 GHz5 GHz 300 Mbps866.7 Mbps —
Max. TX power 22 dBm —
ESD/EMP protection ± 24 kV Contact / Air —
LED Status —
Ambient operating temperature -10 to 50° C (14 to 122° F) -40 to 65° C (-40 to 149° F)
Ambient operating humidity 5 to 95% noncondensing 10 to 90% noncondensing
Sertifikalar CE, FCC, IC CE, FCC, IC
NDAA Compliant Yes Yes
Enclosure material — Diecast aluminum alloy, UV-resistant polycarbonate
Mount — Pole/wall mount
Wind loading — 153 N at 200 km/h (34 lbf at 125 mph)
Wind survivability — 200 km/h (125 mph)
Power method* — (1) DC terminal block54V DC, 6A input*Self-correcting polarity protection on DC terminal block only, diode red protection on all power inputs.
Passive PoE input* — (2) 54V / 1.5A, 4-pair (+1, 2, 4, 5; - 3, 6, 7, 8) passive PoE, ports 1 and 2*Do NOT configure port 1 or 2 in PoE output mode if you are using PoE input power sources.
Passive PoE output — (4) 54V or 24V /1.4A, 4-pair (+1, 2, 4, 5; - 3, 6, 7, 8) passive PoE, ports 1 to 4(12) PoE/PoE+ or 24V/0.7A, 2-pair (+ 4, 5; - 7, 8) passive PoE, ports 5 to 16
Power monitoring — (1) DC terminal block, input power(2) RJ45, ports 1 and 2, PoE input or output power(14) RJ45, ports 3 to 16, PoE output power
Button — Factory reset
LEDs — System: powerRJ45 ports: speed/link/activity, PoESFP ports: speed/link/activity
Proje için teklif al Toplu alım isteği Kurulum desteği

Ürün ekle

Listeye en fazla 4 ürün ekleyebilirsiniz. Aynı kategoriden öneriler:

Ürünlere göz at