Ubiquiti UniFi 120W Power TransPort Adapter vs Ubiquiti UniFi EdgePoint S16 Karşılaştırma

En fazla 4 ürün. Ürün kartlarından veya ürün sayfasından «Karşılaştır» ile ekleyin.

Kablolu

Ubiquiti EdgeMAX 120W Power TransPort Adapter

UACC-Adapter-PT-120W

Fiyat ve stok sorunuz

Stokta

Ürünü incele Listeden çıkar

Kablolu

Ubiquiti EdgeMAX EdgePoint S16

EP-S16

Fiyat ve stok sorunuz

Stokta

Ürünü incele Listeden çıkar

Özellik karşılaştırması

Sadece farkları göster

Özellik	Ubiquiti EdgeMAX 120W Power TransPort Adapter	Ubiquiti EdgeMAX EdgePoint S16
Kategori	Kablolu	Kablolu
Model	UACC-Adapter-PT-120W	EP-S16
Fiyat	Fiyat ve stok sorunuz	Fiyat ve stok sorunuz
Stok	Stokta	Stokta
Boyutlar	169.1 x 75 x 31.6 mm (6.7 x 3 x 1.2")	Without wall-mount: 326.6 x 382.7 x 88.8 mm (12.9 x 15.1 x 3.5")With wall-mount: 326.6 x 382.7 x 105.5 mm (12.9 x 15.1 x 4.2")
Ağırlık	448 g (1 lb)	Without wall-mount: 3.4 kg (7.5 lb)With wall-mount: 3.8 kg (8.4 lb)
Enclosure material	Polycarbonate	Diecast aluminum alloy, UV-resistant polycarbonate
Input connector	IEC320 C14	—
Input voltage	100—240V AC	—
Input frequency	50—60Hz	—
Input current	100V AC, 240V AC / full load ≤ 1.6A	—
Output connector	PowerTransport connector	—
Output voltage	27V DC	—
Output current	4.44A	—
Total output power	120W	—
ESD/EMP protection	Air: ± 10kV, contact: ± 6kV	—
Ambient operating temperature	0 to 50° C (32 to 122° F)	-40 to 65° C (-40 to 149° F)
Ambient operating humidity	10 to 95% noncondensing	10 to 90% noncondensing
Sertifikalar	CE, FCC, IC	CE, FCC, IC
NDAA Compliant	Yes	Yes
Mount	—	Pole/wall mount
Wind loading	—	153 N at 200 km/h (34 lbf at 125 mph)
Wind survivability	—	200 km/h (125 mph)
Networking interface	—	(1) RJ45 serial port(16) 10/100/1000 RJ45 ports(2) 1/10 Gbps SFP+ ports
Power method*	—	(1) DC terminal block54V DC, 6A input*Self-correcting polarity protection on DC terminal block only, diode red protection on all power inputs.
Power supply	—	Min. 54V / 0.8A (Excludes PoE output)
Passive PoE input*	—	(2) 54V / 1.5A, 4-pair (+1, 2, 4, 5; - 3, 6, 7, 8) passive PoE, ports 1 and 2*Do NOT configure port 1 or 2 in PoE output mode if you are using PoE input power sources.
Passive PoE output	—	(4) 54V or 24V /1.4A, 4-pair (+1, 2, 4, 5; - 3, 6, 7, 8) passive PoE, ports 1 to 4(12) PoE/PoE+ or 24V/0.7A, 2-pair (+ 4, 5; - 7, 8) passive PoE, ports 5 to 16
Power monitoring	—	(1) DC terminal block, input power(2) RJ45, ports 1 and 2, PoE input or output power(14) RJ45, ports 3 to 16, PoE output power
Supported voltage range	—	42–56V DC (-48V is NOT supported)
Max. power consumption	—	40W (Excludes PoE output)
Button	—	Factory reset
LEDs	—	System: powerRJ45 ports: speed/link/activity, PoESFP ports: speed/link/activity