2

Ubiquiti airFiber 11 Low-Band Backhaul Radio with Dish Antenna vs Ubiquiti airFiber 24 Karşılaştırma

En fazla 4 ürün. Ürün kartlarından veya ürün sayfasından «Karşılaştır» ile ekleyin.

Seçili (2/4) Ubiquiti airFiber 11 Low-Band Backhaul Radio with Dish Antenna × Ubiquiti airFiber 24 ×
Tümünü temizle

Özellik karşılaştırması

Özellik Ubiquiti airFiber 11 Low-Band Backhaul Radio with Dish Antenna Ubiquiti airFiber 24
Kategori Kablosuz Kablosuz
Model AF11-Complete-LB AF-24
Fiyat Fiyat ve stok sorunuz Fiyat ve stok sorunuz
Stok Stokta Tükendi
Boyutlar 811 x 811 x 460 mm (31.9 x 31.9 x 18.1") 649 x 426 x 303 mm (25.6 x 16.8 x 11.9")
Ağırlık Without mount: 7.14 kg (15.74 lb)With mount: 11.85 kg (26.12 lb) 10.5 kg (23.2 lb)
Montaj Pole mount Pole mount kit (Included)
Networking interface (1) GbE RJ45 port(1) 10/100 MbE RJ45 port (1) GbE RJ45 port(1) 10/100 MbE RJ45 port
Power method Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)Terminal block direct-wire Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)
Power supply 50V DC, 1.2A gigabit PoE adapter (Included) 50V, 1.2A gigabit PoE adapter (Included)
Supported voltage range 38-56V DC 42–58V DC
Max. power consumption 36W 50W
RF connectors (4) SMA Weatherproof, Two per Chain: TX 0, RX 0 (Chain 0) and TX 1, RX 1 (Chain 1)(2) N-Type Waterproof, One per Duplexer —
Ambient operating temperature -40 to 55° C (-40 to 131° F) -40 to 55° C (-40 to 131° F)
Sertifikalar CE, FCC, IC CE, FCC, IC
NDAA Compliant Yes Yes
Modes SISO/MIMO** Comes with (1) Low-Band Duplexer pre-installed for SISO mode. For MIMO mode, a second Duplexer is available, model AF-11-DUP-L. —
Max. throughput 1.2+ Gbps 1.5+ Gbps
Max. range 300+ km —
Encryption 128-bit AES 128-bit AES
Operating frequency* 10.7-11.7 GHz*Depends on regional regulations. —
Max. conducted TX power* 30 dBm*Depends on regional regulations. —
Frequency accuracy ± 1 ppm ±2.5 ppm without GPS synchronization±0.2 ppm with GPS synchronization
Channel bandwidth* 3.5/5/7/10/14/20/ 28/30/40/50/56 MHz selectable**Programmable Uplink and Downlink duty cycles* For region-specific details, refer to the Compliance chapter of the airFiber AF-11FX User Guide at ui.com/download/airfiber**Channel widths may vary according to country/region regulations. —
Wind loading 1538 N @ 200 km/h (346 lbf @ 125 mph) 480 N @ 200 km/h (108 lbf @ 125 mph)
Wind survivability 200 km/h (125 mph) 200 km/h (125 mph)
Frekans 10.3 to 11.7 GHz —
Gain 35 dBi —
HPOL beamwidth 2.5° —
VPOL beamwidth 2.5° —
Maximum VSWR 2:1 —
Polarization Default: H/VAfter rotating OMT: ± 45° Dual-slant
Cross-pol isolation 35 dB —
Pattern regulatory ETSI 302 217-4-2, Class 3, FCC Cat B —
Auxiliary port — (1) RJ-12, alignment tone port
Operating frequency — 24.05 – 24.25 GHz
Ma. range — 13+ km
Packets per second — 1+ million
Uplink/Downlink ratio — Programmable in Half Duplex mode
GPS — GPS clock synchronization
EIRP — ~33 dBm (FCC/IC)~20 dBm (CE)~40 dBm (Other Regions)
Channel bandwidth — 100 MHz
Operating channels — 24.1 GHz, 24.2 GHz
Modulation — 64QAM MIMO16QAM MIMOQPSK MIMOQPSK SISO¼x QPSK SISO
GainTXRX — 33 dBi38 dBi
Beamwidth — < 3.5°
Front-to-back ratio — 70 dB
Cross-polarity Iiolation — > 28 dB
System — (8) Status LEDs:Data port speedData port link/activityConfiguration port speedConfiguration port link/activityGPS synchronizationModulation modeMaster/slaveRF status(1) Two-digit LED display calibrated in dBm
Proje için teklif al Toplu alım isteği Kurulum desteği

Ürün ekle

Listeye en fazla 4 ürün ekleyebilirsiniz. Aynı kategoriden öneriler:

Ürünlere göz at